The Freefly MOVI Pro motorized gimbal stabiliser steadies cameras weighing up to 15lb / 6.8kg, making it compatible with small mirrorless cameras all the way up to smaller cinema cameras such as the Arri Mini. With the included batteries, the camera and essential accessories can be powered...
Bringing big budget camera moves to your production the Freefly MOVI M15 was designed for the most demanding cinema packages out there with no compromise made with its design. It has a maximum payload of 15lb / 6.8kg with compatible camera / lens combinations making able to easily take Arri Mini...
Three modes of operation ; underslung, upright and briefcase mode.
Can take a load of 7.25kg (16lbs) with accuracy of 0.02 degrees and rotates on 3 axis with incredible control and smoothness, and you can even tinker with the settings via bluetooth using a smartphone.
A smaller and lighter version of the popular DJI Ronin - the Ronin-M supports a camera up to 3.6kg (8lbs). Can be used in 3 modes ; underslung, upright and briefcase mode.
Very popular hire item, especially with smaller cameras such as the A7Sii and Canon 5D. Lightweight enough for longer...
The Easyrig vario 5 is the latest and best model and finally allows the line tension to be adjusted. This allows for greater control over a wider range of cameras and rigs. the main advantage is spreading the weight evenly through the hips so that back and neck strain are vastly reduced. It can...
Allows the operator to get smooth shots at speed across bumpy surfaces. Also highly manoeuvrable with a very tight turning circle, but can also be locked in a straight line for tracking shots. Folds up for easy travel.
Also has a removable floor for going ultra low, Balloon Tyres for...
The Super Pee Wee III+ camera dolly is the perfect location dolly that allows the camera to be raised and lowered via a hydraulic arm. It offers a small footprint so it can be maneuvered into tight spaces, and built-in track wheels for both straight and curved track. These dollies also...
This lightweight dolly on which a seat swivel support or JanJib can be mounted, comes with trackwheels and pneumatic wheels. The Matador can be widened with sideboards which are supplied standard with the Matador Dolly. Its extendable back-axles will guarantee a very high degree of stability....
The Focus Dolly is the simple and portable ride-on dolly. It folds up neatly into a metal case for easy transportation, but provides a solid and smooth flat bed dolly.
Includes 16ft of track - curved track and additional straight track available for hire upon request at additional cost....
Keywest Sit-On Track and Dolly with Bazooka and up to 30ft of Track.
Bazooka with 100mm bowl.
Call for more information.
Transportation of this equipment will require a van.
Our IDS Universal Dolly comes with 6 meters of straight track and a 90 degree curve, ideal for single person operation, lightweight and compact.
Whats in the kit...
8 x 1.5m Straight Track
3 x Inside Curve
3 x Outside Curve
1 x Rolling Spider with 3 x Tripod Feet...
Libec TR-30 Dolly and Track is perfect for tracking shots. Easily and quickly assembled into a 3m straight, it is also extremely light and mobile making it perfect for location work and studio alike.
For use with Libec TR-30 Track system.
The Libec CR-90 gives 45° or 90° curve curve with seamless tracking.
Call us now for Libec Dolly and Track hire in Birmingham, the Midlands and throughout the UK.
Please note, this cannot be used on it's own - it must be hired with (or...
8ft of precision stainless steel track
Also available in 6’, 4’and 2' straight sections. 12’, 18’ and 24’ Curve sections.
6ft of precision stainless steel track
Also available in 8’, 4’, 3’and 2' straight sections. 12’, 18’ and 24’ Curve sections.
4ft of precision stainless steel track
Also available in 8' 6’and 2' straight sections. 12’, 18’ and 24’ Curve sections.
2ft of precision stainless steel track
Also available in 8', 6’and 4' straight sections. 12’, 18’ and 24’ Curve sections.
Curved Precision stainless steel track
Also available in 8', 6’, 4’and 2' straight sections.
DollyCrane HD combines the function of the slider, Mini Jib and tower.
Once set up, the system can instantly change its function from slider to Mini Jib and back thanks to its unique construction.
As the model name implies, this is a heavy duty version of the popular DollyCrane, and...
The Libec JB-30U job arm system is robustly engineered and takes only minutes to set up - Making it ideal for domestic location use and studio alike.
It has a 1.7m vertical jib range and can support up to 20kg.
Supplied with weights, under-mount kit, heavy duty legs and heavy duty...
A stand-out feature of the Jib50 is its telescopic arm. Rather than fixing on extension units, a time consuming and often fiddly process, Jib50's arm simply extends by turning the lock levers. Despite this additional mechanism, the Libec jib is still able to support considerable loads. Even...
The kit comes with..
Handgrip Adapter which allows camera operators to adjust camera settings while framing.
Adapter Plate with a set of 15mm bars
Follow focus and Matte Box supplied separately
Camera Rigs available for various setups. From simple handheld 5D rigs to full Arri Cinema Rigs with follow focus's, matte boxes, powered hand grips..
Rigs are bespoke to camera and lens combinations so please give us a call with your requirements.
The Movcam 303-2400 Accessories Kit is compatible with the Sony Alpha A7S MkII and A7R MkII system cameras. It includes a camera cage with accessory shoe, top handle, riser block and LWS Base Plate.
Our POV Helmet Rig is designed for an A7s MkII or 5D Cameras and gives you those realistic point of view shots.
Kit comes with...
1 x Crash Helmet
1 x Pump up Neck Brace
2 x Velcro weights
2 x Small Noga Arms
1 x V-Lock Catcher
***Please note this...
The VFS5 is the 10 metre / 30 ft dive depth housing for the compact Sony PXW-FS5 4K Super 35mm XDCAM Camcorder.
Perfect for snorkelling or shallow diving, sandy, dusty, humid or foul weather conditions this housing will give your camera the best possible protection whilst being fully...
The Crane Plus is capable of supporting a camera and lens that weigh up to an impressive 2.5kg / 5.51lbs. Not bad for such a handy small unit. So it can be used with small cameras like Panasonic's GH4/5 or the Sony A7Smk2 and gives a fluid stabilised look to your footage.
We really like the Osmo X3 but the X5 is just as good at holding a steady shot and it has a much better camera. The Zenmuse X5 camera has a micro 4/3 sensor for improved low light, impressive dynamic range and better overall image quality.
It records in HD or 4K and takes 16 megapixel...
The DJI Osmo camera is an almost unique product. It produces super smooth fully stabilised video in HD or 4K and it is a joy to use all at a very reasonable price. It can be used instead of a gimbal or stabiliser, or with a car and bike mount, on a tripod, or handheld. It has 1 hour of video...
Moy fitting High Hat on a triangular plate
The Ronford Baker Ultra high precision 48" slider is a standard of the film industry because it is the best.
Supplied with precision ground stainless steel runners and rollers, 360 degree lockable rotation and adjustable magnetic stops.
Ultra high precision, ground stainless...
1.5m solid unit Glidetrack with 100mm bowl head.
Suitable for use with Sachtler 18P or 20P - any other tripod please ask.
iFootage Shark slider with counterweight to make a wonderful smooth tracking movement.
Slider rails which can be extended up to 1.3, and fit in a one small easy to carry bag.
Perfect for use with DSRL, C100, C300.
Add on the SYRP Genie control unit to allow unit to be...
The Genie allows both panning and linear motion control, and attaches to standard gear such as dollies, sliders, jib arms and tripods.
Can be set to repeat certain movements with precision, and even repeating at a percentage of the speed, allowing you to overlay tracking shots at...
Reflective Polyboard with stand and holder.
Box of Grip contains:
2x Super Clamp
A classic really handy, easy to position piece of grip to add to your arsenal
5/8'' (16mm ) with 1/4'' and 5/8'' (16mm ) with 3/8'' attachments
3Kg (6,61 lb) payload and 53cm (20,8in) length
The most versatile single piece of light grip gear you will ever have
Payload of 15Kg, hexagonal 16mm attachment with 1/4'' thread
Standard 1/4-20 inch thread mount for cameras a great accompaniment to any Magic Arm
Various lighting stands available.
Note : All lights come with stands as part of the kit.
This Double wind up stand has a 30Kg Payload Heavy Duty Stand
Ideal for HMI's and Mega Booms
Free Sliding Light Stand
5' Max Height
21 to 22"
15 to 19 lbs
Very sturdy stand, with 40" arm to attach a range of accessories.
Autopole with extend and grip between 2 walls to give you horizontal bar to attach lamps or green screen to.
This is the largest boom manufactured by Manfrotto. Movement - including pan, tilt, rotation, and telescopic extension of the boom arm - is controlled by smooth-operating geared crank handles. Fully folded length is 2.2m, with the boom extending a minimum of 50cm past the stand attachment and a...
Heavy-Duty Background Support Cross Bar kit for use with Lastolite pop up backgrounds and paper rolls
Comes with two stands, cross bar and caring case.
Stack of 8 x Apple Boxes
Keep lamps and camera safer by weighing your stands down with a sand bag.
Saddle bag to cradle your camera and keep it stable regardless of where it is mounted. Filled with small lightweight beads, it's designed to suit almost any camera in almost any situation.
Features of our Microphone Stands...
Strong tripod metal base increases durability
Adjustable height and angle for added versatility
Rubber feet grips increase its stability
Weighs over 2kg for increased steadiness and strength
Magliner Gemini Sr 125cm x 60cm (59.5' X 24') Film Cart
The ergonomically designed Magliner hand truck is strong, lightweight and easy to use. This recently added version allows you to use the Gemini Sr, either as a sack truck, or as a four wheeled platform trolley with two shelves. Very...
3m x 3m Instant Shelter
The package includes;
Heavy Duty Anchor Kit, which consists of marquee stakes and heavy duty cam buckle adjuster.