Broadcast quality monaural RF condenser Microphone
Supplied complete with Rycote housing, suspension, fluffy windshield, XLR cable.
Kit Includes...
Sennheiser MKH416 Microphone
Pistrol Grip
Fluffy
1 x XLR Cable
Headphones
Professional High-Quality Radio Transmitter and Receiver with tie clip Microphone.
Runs on 4x AA Batteries (2 for Transmitter, 2 for Receiver). We do not supply these as standard but AA batteries can be bought as consumable item just ask a member of our staff.
Please Note: This...
Professional High-Quality Radio Transmitter and Receiver with tie clip Microphone.
Runs on 4x AA Batteries (2 for Transmitter, 2 for Receiver). We do not supply these as standard but AA batteries can be bought as consumable item just ask a member of our staff.
Please Note: This...
Sony Dual Radio Mic Kit UTX-B40/URX-P03D - gives 2 Transmitters into a single receiver. These can then be split into 2 channels via XLR, or if you are using a Sony camera, can be connected through the Hot Shoe. This has the extra advantage of going into camera Channels 3 and 4 - meaning you can...
Dual Digital Radio Mic system (2 transmitters to one receiver). Receiver slots into a power dock which fits nicely between the camera and V-Mount battery, so you don't have to worry about changing batteries in the Receiver unit.
Covers standard UK channels (38-40), with low latency,...
The Sony Transmitter / Receiver turns most microphones into a wireless unit.
So you can make your 416 Boom wireless or your reporters SM58
Battery Operating Time is approx eight hours with quality AA-size alkaline batteries (not supplied).
TV-Channel 21-30
Carrier...
Robust bodypack receiver delivering clarity along the whole frequency spectrum for use on set, location or stage. Good audio is curtial for a good product and this bodypack will allow the director to listen to the sound coming for the sound operators mixer (used in conjunction with a transmitter...
Highly directional microphone with a reflective capture dish to pick up audio signals too weak for standard microphones. Perfect for wildlife filming, sports events, or any situation where you need to capture audio from distance.
Sound Devices 633 is a six input (3x XLR, 3x Line Only) compact digital mixer with integrated 10-track recorder and timecode.
Technical information can be found here: <a href="https://www.sounddevices.com/product/633/" title="https://www.sounddevices.com/product/633/...
Sound devices 3 to 2 audio mixer.
Mix 3 channels to 2 outputs, allowing you to monitor and record 3 audio inputs into a standard 2-XLR camera.
Ability to pan each channel to left channel, right channel or both - which means you have full control over where your mix is going, and...
Perfect for DSLR shooting - the DR-60D gives 4 channel audio recording and fits snugly between camera and tripod or rig.
Tascam Audio Recorder allows internal recording onto SD cards, or works as a sound box for a DSLR Camera.
With 2 XLR inputs it allows connection with a wide range of microphones. Easily monitor and control your audio levels for DSLR recording.
Also has decent built in microphones,...
Our standard sound kit for shooting 3 audio channels and mixing to suit a standard 2-XLR camera setup.
Kit can be tweaked for your requirements, but generally includes:
3 to 2 Channel Audio Mixer
Sennheiser 416 with Boom Housing
2x Sennheiser G3 Radio Mics
Boom...
With 32 Channels per unit we can supply anything from 1 - 100 units as your production requires
Can be supplied with in ear / covert earpieces at an additional cost
Set of 4 walkie-talkies that are Licence free and two-way. They are easy to use, a range of up to 10km (under perfect conditions), a handy built-in torch and 8 channels.
Kit Includes: 4 Motorola T80 Extreme walkie-talkies, 4 NiMh batteries, 4 belt clips, 2 x twin chargers
...
The Tiny Lockit provides a rock solid, highly accurate, temperature compensating time code generator.
Except for the sync signal output, it comprises the full functionality of its big brother, including ACN (Ambient Clockit Network) support, metadata transfer and logging. These network...
Features of our Microphone Stands...
Strong tripod metal base increases durability
Adjustable height and angle for added versatility
Rubber feet grips increase its stability
Weighs over 2kg for increased steadiness and strength